Sony Support

MHS-TS20K/TS20 Firmware Update Ver.1.05

    Applicable Models
    About this download
    File Info
    System Requirements
    Install

    Applicable Models

    This information is for the following models:
    • MHS-TS20K
    • MHS-TS20

    About this download

    Thank you for your continued interest in Sony products.

    Sony is always concern about quality and customer satisfaction and therefore is offering a firmware update for MHS-TS20K/TS20.

    Applicable firmware versions
    MHS-TS20K/TS20 with the firmware Ver 1.04 or lower.

    How to determine the firmware version
    If the firmware version is already Ver.1.05 or higher, it is not necessary to update the firmware.

    1. Press the Movie button and then press and hold the ON/OFF(Power) button for about 3 sec.

    2. Camera displays the firmware version between Self-Timer button and Playback button for about 4 sec.

      The location of the version displayed is different depending on the camera direction.

      Portrait View



      Landscape View

    Additional improvements

    • The user interface improvement for "Format" function.
    • The user interface improvement for touch panel operation.
    • The user interface improvement for the focus function.


    Supported OS

    1. Windows XP** SP3
    2. Windows Vista SP2***
    3. Windows 7
    4. Mac OS X (v10.3 - v10.6)

      *Must be installed with the above OS at delivery. Proper operation cannot be guaranteed with the upgraded OS environment.
      **64-bit are not supported.
      ***Starter Edition is not supported.

    Available Download
    File name: FIRMWARE.BIN
    File size: 9.89 MB (10,375,168 bytes)
    Updated on: 9th December 2010

    File Info

    File Name

    • Firmware Update Ver.1.05

    File Version

    • 1.05

    File Size

    • 9.89MB

    Release Date

    • 2010-12-09

    System Requirements

    • Windows 7
    • Windows Vista
    • Windows XP
    • Mac OS

    Install

    Details

    Step 1: Download the firmware

    1. Store the downloaded file FIRMWARE.BIN on the desktop(recommended) of your computer.

    Step 2: Connect the camera to the computer

    For Windows Operating System

    1. Connect the camera to the computer with the USB connection support cable (supplied).
      "USB Mode/Mass Storage" will be displayed on the LCD screen.

    2. The computer will detect two drives below.
      Note: Alphabets for drives depend on the computer environment.
      "BLOGGIE(D:)"
      "Bloggie Software(E:)" or "BLOGGIE_SW(E:)"

    3. If LUN Settings is set to "Single", the computer will detect just one drive of BLOGGIE(D:).

    For Mac Operating System

    1. Connect the camera to the computer with the USB connection support cable (supplied)
      "USB Mode/Mass Storage" will be displayed on the LCD screen.


    2. The computer will detect two drives below.　
      "BLOGGIE"
      "BLOGGIE_SW"

    3. If LUN Settings set to "Single", the computer will detect just one drive of BLOGGIE.

    Step 3: Copy the firmware to the camera internal memory

    For Windows Operating System

    1. The drive which has smaller alphabet such as "BLOGGIE(D:)" (refer to step 2) is the internal memory of the camera.
      Alphabets of drive (like[D:]) depend on the computer environment.
      If LUN Settings is set to "Single", the detected drive is the internal memory.
    2. Double-click the icon of the drive of Bloggie(D:) to open.
    3. Copy the downloaded file FIRMWARE.BIN to that drive.
    4. Disconnect the camera with the computer by the procedure below.
    5. Disconnect the USB connection support cable from the camera.

    For Mac Operating System

    1. The drive "BLOGGIE" (refer to step 2) is the internal memory of the camera.
      If LUN Settings is set to "Single", the detected drives is the internal memory.
    2. Double-click the icon of the drive of "BLOGGIE" to open.
    3. Copy the downloaded file FIRMWARE.BIN to that drive.
    4. Disconnect the camera with the computer by the procedure below
      Drag and drop the icon of the drive to the "Trash" icon before disconnecting.
    5. Disconnect the USB connection support cable from camera.

    Step 4. Start the firmware update

    1. Confirm that thebattery icon located at the upper-right corner of the LCD screen is full.
    2. Press the ON/OFF button to power off.
    3. Press the ON/OFF button again to power on.
    4. The firmware update will start automatically.
      You can see animation of "..." in the message of "Updating..." on the LCD screen.


    5. After 10 seconds, the camera will reboot automatically.
      Note
      Do not turn off the camera while updating the firmware or the camera may be damaged.

    Step 5. Check firmware version
    The firmware update is completed succesfully if 1.05 is displayed.

    1. Press the Movie button and then press and hold the ON/OFF(Power) button for about 3 sec.

    2. Camera displays the firmware version 1.05 between Self-Timer button and Playback button for about 4 sec.

      The location of the version displayed is different depending on the camera direction.

      Portrait View



      Landscape View

    Note:

    • If the firmware updating procedure was not completed successfully or the camera cannot turn on, please consult your local authorized Sony service facility.