How to check the MAC(Ethernet) Address on the network board in my Windows 9* preinstalled machine?
How to check the MAC(Ethernet) Address on the network board in my Windows 9* preinstalled machine?
Refer to the following procedure.
You can check the address with using Windows 9* utility [Winipcfg].
(note)
[TCP/IP] has to be installed beforehand.
To check if [TCP/IP] has already installed, refer to the following.
1, Right click on [Network Neighborhood], and then click [Properties].
2, If [TCP/IP] item is displayed under [The following network components are installed] in [Configuration] tab, [TCP/IP] is already installed.
The procedure for checking MAC address.
1, Click [Start]-[Run].
2, Type [winipcfg] in [Open] box and then click [OK].
3, You can check the address in [Adapter Address] under [Ethernet Adapter Information] in [IP Configuration] window.
Refer to the following procedure.
You can check the address with using Windows 9* utility [Winipcfg].
(note)
[TCP/IP] has to be installed beforehand.
To check if [TCP/IP] has already installed, refer to the following.
1, Right click on [Network Neighborhood], and then click [Properties].
2, If [TCP/IP] item is displayed under [The following network components are installed] in [Configuration] tab, [TCP/IP] is already installed.
The procedure for checking MAC address.
1, Click [Start]-[Run].
2, Type [winipcfg] in [Open] box and then click [OK].
3, You can check the address in [Adapter Address] under [Ethernet Adapter Information] in [IP Configuration] window.