If you use AAC codec when making Bluetooth connection with the system, set the AAC setting of the system to ON, by the following procedure.
- Make sure the system is turned off, then connect the supplied AC adaptor.
- Set the BLUETOOTH STANDBY switch to ON.
- Hold down the VOLUME - button, then press and hold the button.
After the SOUND indicator lights up in green and then turns off, the setting is completed.
If there is noise, or sound is interrupted
Set the AAC setting of the system to off, by the procedure above. After the SOUND indicator lights up in amber and then turns off, the AAC setting is set to off.